32
Chapter 4
run the virus checking program to make sure that your
system is ok.
The default setting is ÒDisabled.Ó This setting is
recommended due to the conflicts within new
operating systems.
Utility
Detect IDE
If your system has an IDE hard drive, you can use this
utility to detect its parameters and automatically enter
them into the Standard CMOS Setup. This utility will
autodetect up to four IDE devices.
Exit WinBIOS Setup
Press the <ESC> key to exit the BIOS setup program
while in the main menu of the WinBIOS Setup and the
following three options will be displayed on the screen.
Save Changes and Exit
Select this item to save the values entered during the
current session and then exit the BIOS setup program.
Do Not Save Changes and Exit
Select this item to exit the BIOS setup program without
saving the values which has been entered during the
current session.
Continue
Select this item to return to the WinBIOS setup
program.