This machine is produced and packed with special care to deliver you the best quality possible.
We still advice you use extra care while unpacking the machine. After unpacking make sure to
look for any damage on the outside of the machine and immediately report it to the transport
company.
If you do not make any remarks of transport damage on the freight papers, you will lose your
rightto any insurance claims!
Carefully unpack the stencil printer and keep the original package in case you need to ship the
unit.
Please check to be sure the following items are included:
• 1 stencil printer SP1260 M1
• 3 Allen Keys, metric sizes
• 1 non-permanent fine liner marker pen
• 6 magnetic placeholders for PCBs
• 2 magnetic points of support for PCBs
• 1 transparent outline-sheet to define PCB position
• 1 squeegee
(800) 348 9250
pcbunlimited.com
Some of the features include:
• Stencils do not need mounting holes.
• Fixing a stencil is fast, easy and requires no heating of the stencil.
• Positioning of PCBs is simple but effective.
• You may use for single as well as double sided PCBs. Even if there are already components on
one side!
Setting up
Place the stencil printer on a stable surface. This surface should be heavy enough to carry the
weight of the machine including the pressure you are using while “printing” with the machine.
Leave about 10 cm on each side of the machine free for easy access to the X-axis, Y-axis and
height adjustments.
Placement of the machine
