Model Number
4115A-05A
ROTARY TRANSFORMER TORQUE SENSOR
Revision: D
ECN #: 38181
[6]
Performance
ENGLISH
SI
Measurement Range(Full Scale Capacity)
1000 in-lb
115 N-m
[1]
Sensitivity(± 15 %)(output at rated capacity)
2.5 mV/V
2.5 mV/V
[1][3]
Non-Linearity
≤
0.05 % FS
≤
0.05 % FS
[3]
Hysteresis
≤
0.05 % FS
≤
0.05 % FS
[3]
Non-Repeatability
≤
0.03 % FS
≤
0.03 % FS
[3]
Environmental
Overload Limit
1500 in-lb
170 N-m
Temperature Range(Operating)
-65 to 285 °F
-54 to 141 °C
Temperature Range
(Compensated)
+70 to +170 °F
+21 to 77 °C
Temperature Effect on Output(Maximum)
± 0.002 %Reading/°
F
± 0.0036 %Reading/°C
[4]
Temperature Effect on Zero Balance(Maximum)
± 0.002 %FS/°F
± 0.0036 %FS/°C
[4][3]
Electrical
Excitation Frequency
3.28 kHz
3.28 kHz
Bridge Resistance
350 ohm
350 ohm
[1]
Excitation Voltage
2 to 10 VAC rms
2 to 10 VAC rms
[2]
Bridge Current(at 5 VAC)
50 mA
50 mA
Insulation Resistance
>5000 Mohm
>5000 Mohm
Zero Balance
≤
2 % FS
≤
2 % FS
[3]
Physical
Size (Shaft Length x Housing Length x Housing Diameter)
9.10 in x 8.25 in x
6.00 in
231.14 mm x 209.55 mm x
152.40 mm
Weight
46 lb
20.9 kg
Mounting
Flange w/ Splined
Shaft
Flange w/ Splined Shaft
[5]
Sensing Element
Strain Gage
Strain Gage
Housing Material
Black Oxided Steel
Black Oxided Steel
Shaft Material
Steel
Steel
Electrical Connector
MS3102A-14S-5P
MS3102A-14S-5P
Torsional Stiffness
94 kin-lb/radian
10.6 kN-m/radian
Rotating Inertia
0.005 in-lb/sec2
0.0006 N-m/sec2
Maximum Speed
15,000 RPM
15,000 RPM
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
NOTES:
[1] Nominal.
[2] Recommended 10 VAC RMS.
[3] FS - Full Scale.
[4] Over compensated operating temperature range.
[5] Mounting per AND10262 and AND20002.
[6] See PCB Declaration of Conformance PS062 for details.
SUPPLIED ACCESSORIES:
Model 180-019A 5-socket mating connector for Series 3100, 4100, 4200 torque sensors
Model 8113-105A Relay activated precision shunt calibration module
Entered: DMW
Engineer: JM
Sales: RR
Approved: JC
Spec Number:
Date: 1/18/2012
Date: 1/18/2012
Date: 1/18/2012
Date: 1/18/2012
19262
PCB Load & Torque, Inc.
24350 Indoplex Circle
Farmington Hills, MI 48335
UNITED STATES
Phone: 866-684-7107
Fax: 716-684-0987
E-Mail: [email protected]
Web site: http://www.pcbloadtorque.com
