Model Number
1240-11ADB
LOW PROFILE LOAD CELL, DUAL BRIDGE
Revision: NR
ECN #: 43051
Performance
ENGLISH
SI
Measurement Range(100 x 10^6 cycles)
200 klb
290 kN
[5][6]
Sensitivity(± 10 %)(Rated Output)
4.0 mV/V
4.0 mV/V
[7][1]
Non-Linearity
≤
0.06 % FS
≤
0.06 % FS
Hysteresis
≤
0.06 % FS
≤
0.06 % FS
Non-Repeatability
≤
0.02 % FS
≤
0.02 % FS
Eccentric Load Sensitivity
≤
0.1 %/in
≤
0.1 %/25.4mm
Resonant Frequency
18 kHz
18 kHz
Side Load Sensitivity
≤
0.1 %/in
≤
0.1 %/25.4mm
Creep(in 20 minutes)
0.025 %
0.025 %
Static Error Band
≤
0.06 % FS
≤
0.06 % FS
[5]
Environmental
Overload Limit
300 klb
1335 kN
Load Limit(Side Force, F
X
or F
Y
)
100 klb
445 kN
[3]
Load Limit
(Bending Moment, M
X
or M
Y
)
100k lbf-in
11.3k Nm
[3]
Load Limit
(Axial Torque, M
Z
)
100k lbf-in
11.3k Nm
[3]
Temperature Range(Operating)
-65 to +200 °F
-54 to +93 °C
Temperature Range
(Compensated)
+15 to +115 °F
-9 to +46 °C
Temperature Effect on Output(Maximum)
± 0.0008 %Reading/°F
± 0.0018 %Reading/°C
[4]
Temperature Effect on Zero Balance(Maximum)
± 0.0008 %FS/°F
± 0.0018 %FS/°C
[4]
Electrical
Bridge Resistance
350 Ohm
350 Ohm
[1]
Excitation Voltage(Recommended)
10 VDC
10 VDC
[2]
Insulation Resistance
≥
5k GOhm
≥
5k GOhm
Zero Balance
≤
1 % FS
≤
1 % FS
Physical
Size (Diameter x Height)
11.00 in x 7.00 in
279.40 mm x 177.80 mm
[8]
Weight
135 lb
61.3 kg
Mounting Thread
2 3/4 - 8 UN-3B
No Metric Equivalent
Sensing Element
Strain Gage
Strain Gage
Mounting Torque
6000 lbf-in
678 Nm
Deflection at Full Scale Capacity
0.001 in
0.03 mm
Electrical Connector
PT02E-10-6P (2)
PT02E-10-6P (2)
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
NOTES:
[1] Nominal.
[2] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[5] FS - Full Scale.
[6] Calibrated in tension and compression.
[7] RO - Rated Output.
[8] See Outline Drawing 59188 for Complete Dimensions
OPTIONAL ACCESSORIES:
Model 084A40 Lifting Plug
Model 084A41 Lifting Plug
Model 084A58 Pre-Tension Stud
Model 084A59 Pre-Tension Stud
Model 181-012A PT06A-10-6S(SR)
Model 8311-01-10A CABLE
Entered: AP
Engineer: PE
Sales: KWW
Approved: JSD
Spec Number:
Date: 6/19/2014
Date: 6/19/2014
Date: 6/19/2014
Date: 6/19/2014
59189
PCB Load & Torque, Inc.
24350 Indoplex Circle
Farmington Hills, MI 48335
UNITED STATES
Phone: 866-684-7107
Fax: 716-684-0987
E-Mail: [email protected]
Web site: http://www.pcbloadtorque.com
