PCB Piezotronics M357B06, Инструкция по установке и эксплуатации

Страница: 13 / 14

Model Number
357B06
CHARGE OUTPUT ACCELEROMETER
Revision: E
ECN #: 52135
P erfo rm an ce EN G L ISH SI
Sensitivity(± 20 %) 5 pC/g 0.51 pC/(m/s²)
Measurement Range ± 500 g pk ± 4,905 m/s² pk
Frequency Range(+ 5 %) 10 kHz 10 kHz [1]
Frequency Range (+ 10 %) 15 kHz 15 kHz [2][1]
Frequency Range (+ 3 dB) 25 kHz 25 kHz [1][2]
Resonant Frequency ≥ 50 kHz ≥ 50 kHz
Non-Linearity ≤ 1 % ≤ 1 % [3]
Transverse Sensitivity ≤ 5 % ≤ 5 % [4]
En viro n m en tal
Overload Limit(Shock) ± 10,000 g pk ± 98,100 m/s² pk
Temperature Range -65 to +500 °F -54 to +260 °C
Temperature Response See Graph See Graph [5]
Base Strain Sensitivity ≤ 0.05 g/µε ≤ 0.5 (m/s²)/µε [5]
Electrical
Capacitance 700 pF 700 pF [5]
Insulation Resistance(at 70° F [21°C])
> 10
11
Ohm > 10
11
Ohm
Output Polarity Negative Negative
Electrical Isolation(Base)
> 10
8
Ohm > 10
8
Ohm
[6][2]
P h ysical
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Welded Hermetic Welded Hermetic
Size (Height x Length x Width) 0.23 in x .68 in x 0.38 in 5.8 mm x 17.3 mm x 9.6 mm
Weight 0.08 oz 2.3 gm [5]
Electrical Connector 5-44 Coaxial 5-44 Coaxial
Electrical Connection Position Side Side
Mounting Through Hole Through Hole
[7]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
M - Metric Mount
Supplied Accessory: Model M039A20 Allen wrench, 1.5mm hex (1) replaces Model 039A20
Supplied Accessory: Model M081B36 Insulated cap screw, M2x0.4 thd x 3/8" long (for Model
M357B06) (1) replaces Model 081B36
P
- Positive Output Polarity
Output Polarity Positive Positive
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model except
where noted below. More than one option may be used.
N OTES:
[1]Low frequency response is determined by external signal conditioning electronics.
[2]When used with off ground washer, high frequency specification is typically 2 kHz less on 10% and
3 dB points.
[3]Zero-based, least-squares, straight line method.
[4]Transverse sensitivity is typically <= 3%.
[5]Typical.
[6]Only when using off ground washer.
[7]See PCB Declaration of Conformance PS081 for details.
Date: 09/27/2021 Date: 09/27/2021 Date: 09/27/2021 Date: 09/27/2021 33408
Entered: ND Engineer: BAM Sales: KK Approved: BAM Spec Number:
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com
SU P P L IED A C C ESSORIES:
Model 039A20 Allen wrench, 5/64" hex (1)
Model 081B36 Insulated cap screw, 2-56 thd x 3/8" long (for Model 357B06) (1)
Model ACS-1 NIST traceable frequency response (10 Hz to upper 5% point).