PCB Piezotronics M224C, Инструкция по установке и эксплуатации, Страница: 16 / 17

Model Number
224C
ICP® FORCE SENSOR
Revision: G
ECN #: 40706
Performance ENGLISH SI
Sensitivity(± 15 %) 0.20 mV/lb 44.96 mV/kN
Measurement Range(Compression) 25,000 lb 111.2 kN
Measurement Range (Tension) 8000 lb 35.59 kN
Maximum Static Force(Compression) 29,000 lb 129.00 kN
Maximum Static Force (Tension) 10,000 lb 44.48 kN
Broadband Resolution(1 to 10,000 Hz) 0.60 lb-rms 2.67 N-rms
[1]
Low Frequency Response(-5 %) 0.0003 Hz 0.0003 Hz
[2]
Upper Frequency Limit 8 kHz 8 kHz
[3]
Non-Linearity
≤
1.5 % FS
≤
1.5 % FS
[4]
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity
≤
0.03 %/°F
≤
0.054 %/°C
Electrical
Discharge Time Constant(at room temp)
≥
2000 sec
≥
2000 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance
≤
100 Ohm
≤
100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Spectral Noise(1 Hz) 0.041 lb/
√
Hz 0.18 N/
√
Hz
[1]
Spectral Noise (10 Hz) 0.014 lb/
√
Hz 0.062 N
√
Hz
[1]
Spectral Noise (100 Hz) 0.0039 lb/
√
Hz 0.017 N/
√
Hz
[1]
Spectral Noise (1 kHz) 0.00097 lb/
√
Hz 0.0043 N/
√
Hz
[1]
Physical
Stiffness 6 lb/µin 1.05 kN/µm
[1]
Size (Diameter x Height) 1.34 in x 2.50 in 34.04 mm x 63.5 mm
Weight 8.7 oz 246 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side
Mounting Thread 5/8 - 18 Female 5/8 - 18 Female
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
J
- Ground Isolated
M
- Metric Mount
Mounting Thread M16 x 1.50 Female
N
- Negative Output Polarity
W
- Water Resistant Cable
Electrical Connector Sealed Cable Sealed Cable
Electrical Connection Position Side Side
NOTES:
[1] Typical.
[2] Calculated from discharge time constant.
[3] Estimated using rigid body dynamics calculations.
[4] Zero-based, least-squares, straight line method.
Entered: AP Engineer: JDK Sales: KWW Approved: APB Spec Number:
Date: 3/18/2013 Date: 3/18/2013 Date: 3/18/2013 Date: 3/18/2013
6311
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com