PCB Piezotronics M215B, Инструкция по установке и эксплуатации

Страница: 13 / 15

Model Number
215B
Revision: G
ECN #: 50221
P erfo rm an ce EN G L ISH SI
Sensitivity(± 15 %) 18 pC/lb 4,047 pC/kN
Measurement Range(Compression) ≤ 60,000 lb ≤ 266.9 kN
Maximum Static Force(Compression) 70,000 lb 311.4 kN
Upper Frequency Limit 50,000 Hz 50,000 Hz [1][2]
Non-Linearity ≤ 1.5 % FS ≤ 1.5 % FS [3]
En viro n m en tal
Temperature Range -100 to +400 °F -73 to +204 °C
Temperature Coefficient of Sensitivity ≤ 0.03 %/°F ≤ 0.054 %/°C
Electrical
Capacitance 38 pF 38 pF [4]
Insulation Resistance ≥ 1E12 ≥ 1E12
Output Polarity(Compression) Negative Negative
P h ysical
Preload 12,000 lb 53.379 kN
Stiffness 40 lb/µin 7 kN/µm [4]
Size (Diameter x Height x Bolt Diameter x
Sensing Surface) 1.580 in x 0.510 in x 3/4 in x
1.375 in
40.13 mm x 12.95 mm x 21
mm x 34.93 mm
Size - ID(Hole Diameter) 0.830 in 21.08 mm
Size - OD(Sensor) 1.580 in 40.13 mm
Weight 2.82 oz 80 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side
[5]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
M
- Metric Mount
Supplied Accessory: Model 080A82 Assembly Lubricant
Supplied Accessory: Model 082B05 Anti-friction washer (for Models 205B and 215B)
Supplied Accessory: Model M081A15 Mounting Stud, M16 x 1.50 x 1.650, BeCu
Supplied Accessory: Model M083B05 Pilot Bushing
P - Positive Output Polarity
Output Polarity(Compression) Positive Positive
W - Water Resistant Cable
Electrical Connector Molded Integral Cable Molded Integral Cable
Electrical Connection Position Side Side
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model except
where noted below. More than one option may be used.
N OTES:
[1]Estimated using rigid body dynamics calculations.
[2]Low frequency response and system noise dependent on choice of external signal conditioning
electronics.
[3]Zero-based, least-squares, straight line method.
[4]Typical.
[5]See PCB Declaration of Conformance PS158 for details.
Date: 01/28/2020 Date: 01/28/2020 Date: 01/28/2020 Date: 01/28/2020 1039
Entered: RB Engineer: RPF Sales: RWM Approved: RPF Spec Number:
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com
SU P P L IED A C C ESSORIES:
Model 080A82 Assembly Lubricant
Model 081A15 Mounting Stud, 5/8-18 x 1.650, BeCu
Model 082B05 Anti-friction washer (for Models 205B and 215B)
Model 083B05 Pilot bushing (for Models 205C and 215B)
All manuals and user guides at all-guides.com