PCB Piezotronics M132A31, Инструкция по установке и эксплуатации, Страница: 9 / 10

Model Number
132A31
ICP® PRESSURE SENSOR
Revision: R
ECN #: 44634
Performance ENGLISH SI
Measurement Range 50 psi 345 kPa
Sensitivity(± 30 %) 140 mV/psi 20.3 mV/kPa
Maximum Pressure(Dynamic) 800 psi 5516 kPa
Resolution 0.001 psi 0.007 kPa
Resonant Frequency ≥ 1000 kHz ≥ 1000 kHz
Rise Time(Incident) ≤ 3 µ sec ≤ 3 µ sec [1]
Rise Time (Reflected) ≤ 0.5 µ sec ≤ 0.5 µ sec [2]
Low Frequency Response(-5 %) 11,000 Hz 11,000 Hz
Environmental
Temperature Range(Operating) 0 to +175 °F -18 to +79 °C
Electrical
Output Polarity(Positive Pressure) Positive Positive
Discharge Time Constant(at room temp) ≥ .000045 sec ≥ .000045 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤ 100 Ohm ≤ 100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Physical
Sensing Element Ceramic Ceramic
Housing Material Stainless Steel Stainless Steel
Sealing Epoxy Epoxy
Electrical Connector Integral Twisted Pair Integral Twisted Pair
Weight(without clamp nut) 0.018 oz 0.52 gm [3]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
M
- Metric Mount
N
- Negative Output Polarity
W
- Water Resistant Cable
NOTES:
[1]Rise time in air at Mach 1
[2]Rise time at 20mA
[3]Weight including cable.
SUPPLIED ACCESSORIES:
Model 060A28 Clamp Nut, 1/4-28 x 1/4" Hex (1)
Model 070B09 Solder adaptor (1)
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
Entered: JM Engineer: MJK Sales: RWM Approved: APB Spec Number:
Date: 10/6/2015 Date: 10/6/2015 Date: 10/6/2015 Date: 10/6/2015
132-1310-80