NMS044 Reference Manual Rev E
Removing Cables From the Case
A-7
A.6 Removing Cables From the Case
In the event that the cables need to be removed from the case, follow
these steps.
Step 1
Remove the CBL228-03 from the charge controller by unscrewing the
terminals and gently pulling the cable out. Remove the CBL222-08 from
the top of the 831C by pressing the release button and pulling out.
Step 2
Unscrew the gasket by turning counterclockwise.
Step 3
Using your hands on either side of the case wall, gently push the rubber
stopper out. The cable can be removed through the slit in the stopper.
Step 4
if needed, follow the steps in reverse order to reinstall the cables in the
case.
