PCB Piezotronics IMI Sensors CS640B92, Инструкция по установке и эксплуатации

Страница: 15 / 28

Model Number
CS640B92
LOOP POWERED, CURRENT OUTPUT, INDUSTRIAL VIBRATION SENSOR
Revision: NR
ECN #: 43155
[5]
Performance ENGLISH SI
Measurement Range 0.0 to 2 in/sec pk 0.0 to 50.8 mm/s pk
[1]
Output 4-20 mA 4-20 mA
Frequency Range(± 3 dB) 180 to 60,000 cpm 3 to 1000 Hz
[2][3]
Broadband Resolution 0.01 in/sec pk 0.26 mm/s pk
[4]
Non-Linearity ± 1 % ± 1 %
Environmental
Temperature Range -40 to 176 °F -40 to 80 °C
Hazardous Area Approval Ex ia, AExia IIC T4 Ex ia, AExia IIC T4
Hazardous Area Approval Ex na, AExnA IIC T4 Ex na, AExnA IIC T4
Hazardous Area Approval Class I Div 1 Groups A, B, C, D Class I Div 1 Groups A, B, C, D
Hazardous Area Approval Class I Div 2 Groups A, B, C, D Class I Div 2 Groups A, B, C, D
Hazardous Area Approval Class II Div 1 Groups E, F, G Class II Div 1 Groups E, F, G
Hazardous Area Approval Class III Class III
Electrical
Excitation Voltage 12 to 30 VDC 12 to 30 VDC
Settling Time(within 2% of value) <15 sec <15 sec
Electrical Isolation(Case)
>10
8
Ohm >10
8
Ohm
Physical
Size (Hex x Height) 3.85 in x 5.52 in 98 mm x 140 mm
Weight 1.2 lb 544 gm
Mounting Thread 1/4 NPT No Metric Equivalent
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Electrical Connector Integral Cable Integral Cable
Electrical Connection Position Top Top
Electrical Connections(Positive (+)) 18 AWG Red 18 AWG Red
Electrical Connections (Negative (-)) 18 AWG Black 18 AWG Black
Wire Length 36 in 91.44 cm
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without
notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
NOTES:
[1] Conversion Factor 1 in/sec = 0.0254 m/sec.
[2] Current will fluctuate at frequencies below 5 Hz.
[3] 1Hz = 60 cpm (cycles per minute).
[4] Typical.
[5] See PCB Declaration of Conformance PS039 for details.
SUPPLIED ACCESSORIES:
Model ICS-4 NIST-traceable single-axis amplitude response calibration from 0 cpm (0 Hz) to
upper 10% frequency for 4 - 20 mA output vibration sensor
Entered: AP Engineer: gs Sales: HJB Approved: BAM Spec Number:
Date: 7/7/2014 Date: 7/7/2014 Date: 7/7/2014 Date: 7/7/2014
59340
3425 Walden Avenue, Depew, NY 14043
Phone: 800-959-4464
Fax: 716-684-3823
E-Mail: imi@pcb.com