PCB Piezotronics ICP RH201A76, Инструкция по установке и эксплуатации, Страница: 16 / 17

Model Number
RH201A 76
ICP® FORCE SENSOR
Revision: B
ECN #: 52977
P erfo rm an ce EN G L ISH SI
Sensitivity(± 15 %) 1 mV/lb 224.8 mV/kN
Measurement Range(Compression) 5,000 lb 22.24 kN
Maximum Static Force(Compression) 5,000 lb 22.24 kN
Broadband Resolution(1 to 10,000 Hz) 0.10 lb-rms 0.445 N-rms [1]
Low Frequency Response(- 5 %) 0.0003 Hz 0.0003 Hz [2]
Upper Frequency Limit 90 kHz 90 kHz [3]
Non-Linearity ≤ 1 % FS ≤ 1 % FS [4]
En viro n m en tal
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤ 0.03 %/°F ≤ 0.054 %/°C
Electrical
Discharge Time Constant ≥ 2,000 sec ≥ 2,000 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤ 100 Ohm ≤ 100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Spectral Noise(1 Hz) 0.00307 lb/√Hz 0.0137 N/√Hz [1]
Spectral Noise (10 Hz) 0.00115 lb/√Hz 0.00513 N√Hz [1]
Spectral Noise (100 Hz) 0.000402 lb/√Hz 0.00179 N/√Hz [1]
Spectral Noise (1,000 Hz) 0.000114 lb/√Hz 0.000509 N/√Hz [1]
Output Polarity(Compression) Positive Positive
P h ysical
Preload 1,000 lb 4.448 kN
Stiffness 16 lb/µin 2.8 kN/µm [1]
Size (Diameter x Bolt Diameter x Sensing
Surface x Height) 0.750 in x 0.25 in x 0.500 in x
0.200 in
19.05 mm x 6 mm x 12.7 mm x
5.08 mm
Size - ID(Hole Diameter) 0.251 in 6.38 mm
Size - OD(Sensor) 0.750 in 19.05 mm
Weight 0.25 oz 7 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 5-44 Coaxial Jack 5-44 Coaxial Jack
Electrical Connection Position Side Side
[5]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
This model, designated with an RH prefix, is RoHS compliant. For further details, and to obtain PCB's RoHS Statement of
Conformance, please visit http://www.pcb.com
M - Metric Mount
Supplied Accessory: Model M081A11 Mounting Stud, M5 x 0.8 x 0.730, BeCu (1) replaces Model
081A11
Supplied Accessory: Model M083A15 Pilot Bushing, M5 x 0.8 (1) replaces Model 083A15
N
- Negative Output Polarity
Output Polarity(Compression) Negative Negative
W
- Water Resistant Cable
Electrical Connector Sealed Cable Sealed Cable
Electrical Connection Position Side Side
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model except
where noted below. More than one option may be used.
N OTES:
[1]Typical.
[2]Calculated from discharge time constant.
[3]Estimated using rigid body dynamics calculations.
[4]Zero-based, least-squares, straight line method.
[5]See PCB Declaration of Conformance PS023 for details.
Date: 07/08/2022 Date: 07/08/2022 Date: 07/08/2022 Date: 07/08/2022 37137
Entered: ND Engineer: MJK Sales: KWW Approved: AJA Spec Number:
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com
3425 Walden Avenue, Depew, NY 14043
SU P P L IED A C C ESSORIES:
Model 081A11 Mounting Stud, 10-32 x 0.730, BeCu (1)
Model 083A15 Pilot Bushing, 10-32 (1)