Model Number
422E51
IN-LINE CHARGE CONVERTER
Revision: E
ECN #: 37900
[4]
Performance
ENGLISH
SI
Sensitivity(± 5.0 %)(Charge Conversion)
100 mV/pC
100 mV/pC
Input Range
± 50 pC
± 50 pC
Overrange
± 8 V
± 8 V
Low Frequency Response(-5 %)
5 Hz
5 Hz
High Frequency Response(-5 %)
100 kHz
100 kHz
[3]
Non-Linearity
≤
1.0 % FS
≤
1.0 % FS
Environmental
Temperature Range(Operating)
-65 to +250 °F
-54 to +121 °C
Maximum Shock
5000 g pk
49,050 m/s² pk
Maximum Vibration(5 to 2000 Hz)
100 g pk
981 m/s² pk
Electrical
Excitation Voltage
18 to 28 VDC
18 to 28 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Voltage
± 5.0 V
± 5.0 V
Output Polarity
Inverted
Inverted
Output Impedance
100 ohm
100 ohm
Output Bias Voltage
9 to 13 VDC
9 to 13 VDC
Maximum Input Voltage
40 V
40 V
Broadband Electrical Noise(1 to 10,000 Hz)
49 µV
-86 dB
[1]
Spectral Noise(1 Hz)
19 µV/
√
Hz
-94 dB
[1]
Spectral Noise
(10 Hz)
5.1 µV/
√
Hz
-106 dB
[1]
Spectral Noise
(100 Hz)
1.5 µV/
√
Hz
-116 dB
[1]
Spectral Noise
(1 kHz)
0.6 µV/
√
Hz
-124 dB
[1]
Spectral Noise
(10 kHz)
0.2 µV/
√
Hz
-134 dB
[1]
Capacitance(Feedback)
10 pF
10 pF
Overload Recovery Time
10 µsec
10 µsec
Discharge Time Constant
>0.1 sec
>0.1 sec
Resistance(Feedback)
1.2x10
10
ohm
1.2x10
10
ohm
[2]
Source Capacitance Loading
0.0005 %/pF
0.0005 %/pF
Physical
Housing Material
Stainless Steel
Stainless Steel
Sealing
Epoxy
Epoxy
Electrical Connector(Input)
10-32 Coaxial Jack
10-32 Coaxial Jack
Electrical Connector
(Output)
BNC Jack
BNC Jack
Size (Diameter x Length)
0.52 in x 3.4 in
13 mm x 86 mm
Weight
1.15 oz
32.7 gm
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
NOTES:
[1] Tested using voltage source and input capacitor equal to the feedback capacitor, to simulate
a charge output sensor.
[2] Effective feedback resistance for time constant is 3 times tested value due to circuitry (i.e
1x10E9 = 3x10E9 ohm)
[3] High frequency response may be limited by supply current and output cable length.
[4] See PCB Declaration of Conformance PS024 for details. A low impendance connection from
case to earth ground is required to maintain CE compliance.
Entered: DMW
Engineer: KL
Sales: JJM
Approved: BAM
Spec Number:
Date: 12/14/2011
Date: 12/14/2011
Date: 12/14/2011
Date: 12/14/2011
25577
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
Содержание 422E5 Series
Страница 8: ......