Model Number
356M57
TRIAXIAL ICP® ACCELEROMETER
Revision: J
ECN #: 45906
Performance
ENGLISH
SI
Sensitivity(± 10 %)
10 mV/g
1.02 mV/(m/s²)
Measurement Range
± 500 g pk
± 4905 m/s² pk
Frequency Range(± 5 %)(y or z axis)
2 to 10,000 Hz
2 to 10,000 Hz
Frequency Range
(± 5 %)(x axis)
2 to 7000 Hz
2 to 7000 Hz
Resonant Frequency
≥
55 kHz
≥
55 kHz
Broadband Resolution(1 to 10,000 Hz)
0.003 g rms
0.03 m/s² rms
[1]
Non-Linearity
≤
1 %
≤
1 %
[2]
Transverse Sensitivity
≤
5 %
≤
5 %
Environmental
Overload Limit(Shock)
± 10,000 g pk
± 98,100 m/s² pk
Temperature Range(Operating)
-65 to +250 °F
-54 to +121 °C
Temperature Response
See Graph
See Graph
[1]
Electrical
Excitation Voltage
18 to 30 VDC
18 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
≤
200 Ohm
≤
200 Ohm
Output Bias Voltage
7 to 12 VDC
7 to 12 VDC
Discharge Time Constant
0.3 to 1.0 sec
0.3 to 1.0 sec
Settling Time(within 10% of bias)
<3 sec
<3 sec
Spectral Noise(1 Hz)
1000 µg/
√
Hz
9810 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise
(10 Hz)
300 µg/
√
Hz
2943 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise
(100 Hz)
80 µg/
√
Hz
785 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise
(1 kHz)
25 µg/
√
Hz
308 (µm/sec
2
)/
√
Hz
[1]
Physical
Sensing Element
Ceramic
Ceramic
Sensing Geometry
Shear
Shear
Housing Material
Titanium
Titanium
Sealing
Welded Hermetic
Welded Hermetic
Size (Height x Length x Width)
0.4 in x 0.4 in x 0.4 in
10.2 mm x 10.2 mm x 10.2 mm
Weight(without cable)
0.14 oz
4 gm
[1]
Electrical Connector
Integral Cable
Integral Cable
[3]
Electrical Connection Position
Side
Side
Cable Termination
1/4-28 4-Pin Jack
1/4-28 4-Pin Jack
Cable Length
5 ft
1.5 m
Cable Type
034 4-cond Shielded
034 4-cond Shielded
[4]
Mounting Thread
5-40 Female
5-40 Female
Mounting Torque
4 to 5 in-lb
45 to 56 N-cm
[5]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
NOTES:
[1] Typical.
[2] Zero-based, least-squares, straight line method.
[3] Materials selected for a TML of 1% or less and a CVCM of 0.1% or less.
[4] Outgassing is limited to PTFE in the cable. All other outgassing materials are omitted from
this model.
[5] See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model 034M22/005 4-cond. shielded cable, 5 ft (1.5M), 4-pin plug to (3) BNC plugs (1)
Model 080A Adhesive Mounting Base (1)
Model 080A109 Petro Wax (1)
Model 081A27 Mounting Stud (5-40 to 5-40) (1)
Model 081A90 Mounting stud, 10-32 to 5-40 (1)
Model ACS-1T NIST traceable triaxial amplitude response, 10 Hz to upper 5% frequency. (1)
Model M081A27 Metric mounting stud, 5-40 to M3 x 0.50 long (1)
Entered: LK
Engineer: RB
Sales: RWM
Approved: BAM
Spec Number:
Date: 9/2/2016
Date: 9/2/2016
Date: 9/2/2016
Date: 9/2/2016
10267
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
