PCB Piezotronics 353B77, Инструкция по установке и эксплуатации

Страница: 15 / 17

Model Number
353B77
ICP® ACCELEROMETER
Revision: B
ECN #: 44362
Performance ENGLISH SI
Sensitivity(± 20 %) 2 mV/g 0.204 mV/(m/s²)
Measurement Range ± 2500 g pk ± 24,525 m/s² pk
Frequency Range(± 5 %) 1 to 10,000 Hz 1 to 10,000 Hz
Frequency Range (± 10 %) 0.7 to 20,000 Hz 0.7 to 20,000 Hz
Frequency Range (± 3 dB) 0.35 to 30,000 Hz 0.35 to 30,000 Hz
Electrical Filter Corner Frequency 30,000 Hz 30,000 Hz [1]
Electrical Filter Roll-off 6 dB/octave 6 dB/octave [1]
Resonant Frequency ≥ 70 kHz ≥ 70 kHz
Broadband Resolution(1 to 10,000 Hz) 0.05 g rms 0.5 m/s² rms [1]
Non-Linearity ≤ 1 % ≤ 1 % [2]
Transverse Sensitivity ≤ 5 % ≤ 5 % [3]
Environmental
Overload Limit(Shock) ± 10,000 g pk ± 98,100 m/s² pk
Temperature Range(Operating) -65 to +250 °F -54 to +121 °C
Temperature Response See Graph See Graph [1]
Base Strain Sensitivity ≤ 0.007 g/µ ε ≤ 0.07 (m/s²)/µ ε [1]
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤ 100 Ohm ≤ 100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Discharge Time Constant 0.5 to 2.0 sec 0.5 to 2.0 sec
Settling Time(within 10% of bias) ≤ 5 sec ≤ 5 sec
Spectral Noise(1 Hz) 6500 µg/ √ Hz
63,765 (µm/sec
2
)/ √ Hz
[1]
Spectral Noise (10 Hz) 2000 µg/ √ Hz
19,620 (µm/sec
2
)/ √ Hz
[1]
Spectral Noise (100 Hz) 600 µg/ √ Hz
5890 (µm/sec
2
)/ √ Hz
[1]
Spectral Noise (1000 Hz) 60 µg/ √ Hz
590 (µm/sec
2
)/ √ Hz
[1]
Physical
Size (Height x Hex) 0.59 in x 9/32 in 15.0 mm x 9/32 in
Weight 0.06 oz 1.7 gm [1]
Sensing Element Quartz Quartz
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Electrical Connector Solder Pins Solder Pins
Electrical Connection Position Top Top
Cable Termination 10-32 Coaxial Plug 10-32 Coaxial Plug
Cable Length 10 ft 3.0 m
Cable Type 031 Twisted Pair 031 Twisted Pair
Mounting Thread 5-40 Male 5-40 Male
Mounting Torque 8 to 12 in-lb 90 to 135 N-cm
[4]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
A
- Adhesive Mount
Supplied Accessory : Model 080A90 Quick Bonding Gel (1) replaces Model 080A15
J
- Ground Isolated
Frequency Range(5 %) 1 to 8000 Hz 1 to 8000 Hz
Frequency Range (10 %) 0.7 to 15,000 Hz 0.7 to 15,000 Hz
Resonant Frequency ≥ 56 kHz ≥ 56 kHz
Electrical Isolation(Base)
≥ 10
8
Ohm ≥ 10
8
Ohm
Size - Hex x Height 3/8 in x 0.77 in 3/8 in x 19.6 mm
Weight 0.10 oz 2.9 gm [1]
M
- Metric Mount
Mounting Thread M3 x 0.50 Male M3 x 0.50 Male
Supplied Accessory : Model M080A15 Adhesive Mounting Base (1) replaces Model 080A15
W
- Water Resistant Cable
Temperature Range(Operating) -20 to +220 °F -29 to +104 °C
Electrical Connector Sealed Integral Cable Sealed Integral Cable
Electrical Connection Position Top Top
Cable Length 10 ft 3
Cable Type 018 Coaxial 018 Coaxial
NOTES:
[1]Typical.
[2]Zero-based, least-squares, straight line method.
[3]Transverse sensitivity is typically
≤ 3%.
[4]See PCB Declaration of Conformance PS135 for details.
SUPPLIED ACCESSORIES:
Model 080A109 Petro Wax (1)
Model 080A15 Adhesive Mounting Base (1)
Model ACS-1 NIST traceable frequency response (10 Hz to upper 5% point). (1)
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
Entered: JM Engineer: NJF Sales: RWM Approved: NJF Spec Number:
Date: 6/29/2015 Date: 6/29/2015 Date: 6/29/2015 Date: 6/29/2015
31536