PCB Piezotronics 352C23/NC, Инструкция по установке и эксплуатации, Страница: 15 / 17

Model Number
352C23
ICP® ACCELEROMETER
Revision: E
ECN #: 42197
Performance ENGLISH SI
Sensitivity(± 20 %) 5 mV/g 0.5 mV/(m/s²)
Measurement Range ± 1000 g pk ± 9810 m/s² pk
Frequency Range(± 5 %) 2.0 to 10,000 Hz 2.0 to 10,000 Hz
Frequency Range (± 10 %) 1.5 to 15,000 Hz 1.5 to 15,000 Hz
Frequency Range (± 3 dB) 0.7 to 25,000 Hz 0.7 to 25,000 Hz
Resonant Frequency
≥
70 kHz
≥
70 kHz
Broadband Resolution(1 to 10,000 Hz) 0.003 g rms 0.03 m/s² rms
[1]
Non-Linearity
≤
1 %
≤
1 %
[2]
Transverse Sensitivity
≤
5 %
≤
5 %
Environmental
Overload Limit(Shock) ± 10,000 g pk ± 98,000 m/s² pk
Temperature Range(Operating) -65 to +250 °F -54 to +121 °C
Temperature Response See Graph See Graph
[1]
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance
≤
200 Ohm
≤
200 Ohm
Output Bias Voltage 7 to 12 VDC 7 to 12 VDC
Discharge Time Constant 0.24 to 1.0 sec 0.24 to 1.0 sec
Settling Time(within 10% of bias) <3 sec <3 sec
Spectral Noise(1 Hz) 1500 µg/
√
Hz
14,715 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise (10 Hz) 400 µg/
√
Hz
3924 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise (100 Hz) 120 µg/
√
Hz
1177 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise (1 kHz) 30 µg/
√
Hz
294 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise (10 kHz) 20 µg/
√
Hz
196 (µm/sec
2
)/
√
Hz
[1]
Electrical Isolation(Base)
>10
8
Ohm >10
8
Ohm
Physical
Size (Height x Length x Width) .11 in x 0.34 in x 0.16 in 2.8 mm x 8.6 mm x 4.1 mm
Weight 0.007 oz 0.2 gm
[1]
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Anodized Aluminum Anodized Aluminum
Sealing Epoxy Epoxy
Electrical Connector 3-56 Coaxial Jack 3-56 Coaxial Jack
Electrical Connection Position Side Side
Mounting Adhesive Adhesive
[3]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
NOTES:
[1] Typical.
[2] Zero-based, least-squares, straight line method.
[3] See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model 030A10 Coax Cable, 10 ft (3 m), 3-56 plug to 10-32 plug. (1)
Model 039A26 Removal Tool (1)
Model 080A109 Petro Wax (1)
Model ACS-1 NIST traceable frequency response (10 Hz to upper 5% point). (1)
Entered: AP Engineer: JJB Sales: WDC Approved: JJB Spec Number:
Date: 11/8/2013 Date: 11/8/2013 Date: 11/8/2013 Date: 11/8/2013
17738
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com