Model Number
350C 03
ICP® SHOCK ACCELEROMETER
Revision: C
ECN #: 52331
P erfo rm an ce
EN G L ISH
SI
Sensitivity(± 30 %)
0.5 mV/g
0.05 mV/(m/s²)
Measurement Range
± 10,000 g pk
± 98,000 m/s² pk
Frequency Range(± 1 dB)
0.4 to 10,000 Hz
0.4 to 10,000 Hz
Frequency Range
(- 3 dB)
0.2 to 25,000 Hz
0.2 to 25,000 Hz
[1]
Electrical Filter Corner Frequency(- 3 dB)
17 kHz
17 kHz
[2][3]
Mechanical Filter Resonant Frequency
35 kHz
35 kHz
[2][4]
Resonant Frequency
≥ 100 kHz
≥ 100 kHz
Broadband Resolution(1 to 10,000 Hz)
0.04 g rms
0.39 m/s² rms
[2]
Non-Linearity(per 1000 g (9810 m/s
2
))
≤ ±2.0 %
≤ ±2.0 %
Transverse Sensitivity
≤ 7 %
≤ 7 %
En viro n m en tal
Overload Limit(Shock)
± 50,000 g pk
± 490,000 m/s² pk
Temperature Range(Operating)
0 to +150 °F
-18 to +66 °C
Temperature Range
(Storage)
-40 to +200 °F
-40 to +93 °C
Temperature Response
See Graph
See Graph
[2]
Base Strain Sensitivity
0.002 g/µε
0.02 (m/s²)/µε
[2]
Electrical
Excitation Voltage
20 to 30 VDC
20 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
≤ 200 Ohm
≤ 200 Ohm
Output Bias Voltage
8 to 14 VDC
8 to 14 VDC
Discharge Time Constant
1.0 to 2.0 sec
1.0 to 2.0 sec
Settling Time(within 10% of bias)
< 10 sec
< 10 sec
P h ysical
Sensing Element
Ceramic
Ceramic
Sensing Geometry
Shear
Shear
Housing Material
Titanium
Titanium
Sealing
Hermetic
Hermetic
Size (Hex x Height)
0.375 in x 1.15 in
9.5 mm x 29.2 mm
Weight
0.19 oz
5.4 gm
[2]
Electrical Connector
10-32 Coaxial Jack
10-32 Coaxial Jack
Electrical Connection Position
Top
Top
Mounting
Stud
Stud
Mounting Thread
1/4-28 Male
1/4-28 Male
Mounting Torque
25 to 35 in-lb
280 to 390 N-cm
[5]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
M
- Metric Mount
Mounting Thread
M6 x 0.75 Male
M6 x 0.75 Male
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model except
where noted below. More than one option may be used.
N OTES:
[1]Typical corner frequency for coupled electrical and mechanical filters.
[2]Typical.
[3]Electrical filter is a second order filter.
[4]Amplitude at resonance is +9 dB.
[5]See PCB Declaration of Conformance PS023 for details.
Date: 11/17/2021
Date: 11/17/2021
Date: 11/17/2021
Date: 11/17/2021
60171
Entered: ND
Engineer: BAM
Sales: KK
Approved: BAM
Spec Number:
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
3425 Walden Avenue, Depew, NY 14043
OP TION A L A C C ESSORIES:
Model ACS-14 High G shock accelerometer calibration using Hopkinson bar. (1)
Model ACS-22 NIST Traceable frequency response (100Hz to ±1 dB point) (1)
