Model Number
350B04
SHEAR ICP® SHOCK SENSOR
Revision: G
ECN #: 42036
Performance
ENGLISH
SI
Sensitivity(± 30 %)
1.0 mV/g
0.10 mV/(m/s²)
Measurement Range
± 5000 g pk
± 49,000 m/s² pk
Frequency Range(± 1 dB)
0.4 to 10,000 Hz
0.4 to 10,000 Hz
Frequency Range
(-3 dB)
0.2 to 25,000 Hz
0.2 to 25,000 Hz
[2]
Electrical Filter Corner Frequency(-3 dB)
13 kHz
13 kHz
[1][3]
Mechanical Filter Resonant Frequency
23 kHz
23 kHz
[1][4]
Resonant Frequency
≥
100 kHz
≥
100 kHz
Broadband Resolution(1 to 10,000 Hz)
0.02 g rms
0.20 m/s² rms
[1]
Non-Linearity
≤
2.0 %
≤
2.0 %
Transverse Sensitivity
≤
7 %
≤
7 %
Environmental
Overload Limit(Shock)
± 50,000 g pk
± 490,000 m/s² pk
Temperature Range(Operating)
0 to +150 °F
-18 to +66 °C
Temperature Range
(Storage)
-40 to +200 °F
-40 to +93 °C
Temperature Response
See Graph
See Graph
Base Strain Sensitivity
0.002 g/µ
ε
0.02 (m/s²)/µ
ε
[1]
Electrical
Excitation Voltage
20 to 30 VDC
20 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
≤
200 Ohm
≤
200 Ohm
Output Bias Voltage
8 to 14 VDC
8 to 14 VDC
Discharge Time Constant
1.0 to 2.0 sec
1.0 to 2.0 sec
[1]
Settling Time(within 10% of bias)
<10 sec
<10 sec
Physical
Sensing Element
Ceramic
Ceramic
Sensing Geometry
Shear
Shear
Housing Material
Titanium
Titanium
Sealing
Hermetic
Hermetic
Size (Hex x Height)
0.375 in x 1.02 in
9.5 mm x 25.9 mm
Weight
0.16 oz
4.5 gm
[1]
Electrical Connector
10-32 Coaxial Jack
10-32 Coaxial Jack
Electrical Connection Position
Top
Top
Mounting Thread
1/4-28 Male
1/4-28 Male
[5]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
M
- Metric Mount
Mounting Thread
M6 x 0.75 Male
M6 x 0.75 Male
W
- Water Resistant Cable
Electrical Connector
Sealed Attached Cable
Sealed Attached Cable
NOTES:
[1] Typical.
[2] Typical corner frequency for coupled electrical and mechanical filters.
[3] Electrical filter is a second order filter.
[4] Amplitude at resonance is +9 dB.
[5] See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model ACS-14 High G shock accelerometer calibration using Hopkinson bar. (1)
Model ACS-22 NIST Traceable frequency response (100Hz to ±1 dB point) (1)
Entered: AP
Engineer: BAM
Sales: WDC
Approved: BAM
Spec Number:
Date: 9/17/2013
Date: 9/17/2013
Date: 9/17/2013
Date: 9/17/2013
11177
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
