PCB Piezotronics 260A11, Инструкция по установке и эксплуатации, Страница: 13 / 16

Model Number
260A 11
Revision: P
ECN #: 50553
P erfo rm an ce EN G L ISH SI
Sensitivity(± 15 %)(Z Axis) 15 pC/lb 3.37 pC/N [1]
Sensitivity (± 15 %)(X or Y Axis) 32 pC/lb 7.19 pC/N [1]
Measurement Range(Z Axis) 1,000 lb 4.45 kN
Measurement Range (X or Y Axis) 500 lb 2.22 kN
Maximum Force(z axis) 1,320 lb 5.87 kN
Maximum Force (x or y axis) 660 lb 2.94 kN
Maximum Moment(z axis) 14 ft-lb 18.98 Nm
Maximum Moment (x or y axis) 13 ft-lb 17.63 Nm
Upper Frequency Limit 90 kHz 90 kHz
Non-Linearity ≤ 1 % FS ≤ 1 % FS [2]
Cross Talk(between x and y axis) ± 3 % ± 3 %
Cross Talk (between (x or y axis) and z axis) ± 5 % ± 5 %
En viro n m en tal
Temperature Range -100 to +350 °F -73 to +177 °C
Electrical
Capacitance(all channels) 18 pF 18 pF [3]
Insulation Resistance(all channels)
≥ 10
12
Ohm ≥ 10
12
Ohm
Output Polarity(in direction of markings) Negative Negative
P h ysical
Preload ≤ 5,000 lb ≤ 22.25 kN [4]
Stiffness(z axis) 10 lb/µin 1.75 kN/µm [3]
Stiffness (x or y axis) 4 lb/µin 0.7 kN/µm [3]
Size (Height x Length x Width x Bolt
Diameter x ID x Sensing Surface) 0.390 in x 0.950 in x 0.950 in x
.313 in x 0.319 in x 0.680 in
9.90 mm x 24.1 mm x 24.1
mm x 8 mm x 8.10 mm x 17.27
mm
Weight 0.868 oz 24.59 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector(Quantity, 3) 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
W - Water Resistant Cable
Electrical Connection Position Side Side
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model except
where noted below. More than one option may be used.
N OTES:
[1]Sensitivites are for listed preload. Sensitivites may vary ±5% depending on preload used.
[2]Zero-based, least-squares, straight line method.
[3]Typical.
[4]Preload should be at least 10 times the X and Y operating range used.
Date: 04/17/2020 Date: 04/17/2020 Date: 04/17/2020 Date: 04/17/2020 6232
Entered: LK Engineer: RPF Sales: KK Approved: RPF Spec Number:
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com
SU P P L IED A C C ESSORIES:
Model 081A70 Mounting Stud (1)
Model 082B02 Anti-Friction Washer (1)
Model 083A10 Pilot Bushing (1)
Model M081A70 Mounting Stud (1)