PCB Piezotronics 208C05, Инструкция по установке и эксплуатации, Страница: 16 / 17

Model Number
208C05
ICP® FORCE SENSOR
Revision: H
ECN #: 45224
Performance ENGLISH SI
Sensitivity(± 15 %) 1 mV/lb 224.82 mV/kN
Measurement Range(Compression) 5000 lb 22.24 kN
Measurement Range(Tension) 500 lb 2.224 kN
Maximum Static Force(Compression) 8000 lb 35.59 kN
Maximum Static Force(Tension) 500 lb 2.224 kN
Broadband Resolution(1 to 10,000 Hz) 0.05 lb-rms 0.222 N-rms [1]
Low Frequency Response(-5 %) 0.0003 Hz 0.0003 Hz [2]
Upper Frequency Limit 36,000 Hz 36,000 Hz [3]
Non-Linearity ≤ 1 % FS ≤ 1 % FS [4]
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤ 0.05 %/°F ≤ 0.09 %/°C
Electrical
Discharge Time Constant(at room temp) ≥ 2000 sec ≥ 2000 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤ 100 Ohm ≤ 100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Spectral Noise(1 Hz) 0.00168 lb/ √ Hz 0.00750 N/ √ Hz [1]
Spectral Noise(10 Hz) 0.00112 lb/ √ Hz 0.00501 N √ Hz [1]
Spectral Noise(100 Hz) 0.000459 lb/ √ Hz 0.00205 N/ √ Hz [1]
Spectral Noise(1000 Hz) 0.000133 lb/ √ Hz 0.000592 N/ √ Hz [1]
Output Polarity(Compression) Positive Positive
Physical
Stiffness 6 lb/µin 1.05 kN/µm [1]
Size (Hex x Height x Sensing Surface) 0.625 in x 0.625 in x 0.500 in 15.88 mm x 15.88 mm x 12.7 mm
Weight 0.80 oz 22.7 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side
Mounting Thread 10-32 Female 10-32 Female
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
N
- Negative Output Polarity
Output Polarity(Compression) Negative Negative
W
- Water Resistant Cable
NOTES:
[1]Typical.
[2]Calculated from discharge time constant.
[3]Estimated using rigid body dynamics calculations.
[4]Zero-based, least-squares, straight line method.
[5]See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model 080A81 Thread Locker (1)
Model 081B05 Mounting Stud (10-32 to 10-32) (2)
Model 084A03 Impact Cap (1)
Model M081A62 Mounting stud, 10-32 to M6 x 1, BeCu with shoulder (2)
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com
[5]
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
Entered: LK Engineer: MJK Sales: KWW Approved: APB Spec Number:
Date: 3/29/2016 Date: 3/29/2016 Date: 3/29/2016 Date: 3/29/2016
8369