PCB Piezotronics 1203 Series, Инструкция по установке и эксплуатации, Страница: 15 / 16

Model Number
1403-12A
FATIGUE RATED LOW PROFILE LOAD CELL
Revision: B
ECN #: 43809
Performance ENGLISH SI
Measurement Range(100 x 10^6 cycles) 500 lbf 2224 N [6][7]
Sensitivity(± 10 %)(RO) 1.0 mV/V 1.0 mV/V [3][1]
Non-Linearity ≤ 0.04 % FS ≤ 0.04 % FS [6][8]
Hysteresis ≤ 0.03 % FS ≤ 0.03 % FS [6][8]
Non-Repeatability ≤ 0.02 %RO ≤ 0.02 %RO [3][8]
Eccentric Load Sensitivity 0.1 %/in 0.1 %/25.4mm [8]
Resonant Frequency 3.5 kHz 3.5 kHz
Side Load Sensitivity 0.1 %/in 0.1 %/25.4mm [8]
Creep(in 20 minutes) 0.025 % 0.025 % [8]
Static Error Band ≤ 0.03 % FS ≤ 0.03 % FS [6][8]
Environmental
Overload Limit 1500 lbf 6672 N
Load Limit(Side Force, F
X
or F
Y
) 1000 lbf 4448 kN [4]
Load Limit (Bending Moment, M
X
or M
Y
) 1000 lbf-in 113 Nm [4]
Load Limit (Axial Torque, M
Z
) 1000 lbf-in 113 Nm [4]
Temperature Range(Operating) -65 to +200 °F -54 to +93 °C
Temperature Range (Compensated) +15 to +115 °F -9 to +46 °C
Temperature Effect on Output(Maximum) ± 0.0008 %Reading/°F ± 0.0018 %Reading/°C [5]
Temperature Effect on Zero Balance(Maximum) ± 0.0008 %FS/°F ± 0.0018 %FS/°C [5]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [1]
Excitation Voltage(Recommended) 10 VDC 10 VDC [2]
Insulation Resistance >5k GOhm >5k GOhm
Zero Balance ± 1 %RO ± 1 %RO [3]
Output Polarity +Tension +Tension
Physical
Size (Diameter x Height) 4.12 in x 2.50 in 104.6 mm x 63.5 mm [9]
Weight 6.4 lb 2.9 kg
Mounting Thread 5/8 - 18 UNF-3B No Metric Equivalent
Housing Material Painted Steel Painted Steel
Sensing Element Strain Gage Strain Gage
Mounting Torque 200 lbf-in 23 Nm
Deflection at Full Scale Capacity 0.0005 in 0.013 mm
Electrical Connector PT02E-10-6P PT02E-10-6P
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
1403-12B
- PC04E-10-6P Connector
1403-12C
- PT02E-12-8P Connector
1403-12D
- PC01E-12-8P Connector
NOTES:
[1]Nominal.
[2]Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[3]RO - Rated Output.
[4]Singularly applied, i.e. no other extraneous loads.
[5]Over compensated operating temperature range.
[6]FS - Full Scale.
[7]Calibrated in tension and compression.
[8]Performance specifications guaranteed with factory installed optional Tension Base 084A100
[9]See Outline Drawing 49932 for Complete Dimensions
OPTIONAL ACCESSORIES:
Model 084A100 TENSION LOAD BASE W/ 5/8-18 UNF-3B THD
Model 084A55 Pre-Tension Stud
Model 084A90 Connector Shroud
Model 181-012A PT06A-10-6S(SR)
Model 8311-01-10A CABLE
PCB Load & Torque, Inc.
24350 Indoplex Circle
Farmington Hills, MI 48335
UNITED STATES
Phone: 866-684-7107
Fax: 716-684-0987
E-Mail: ltinfo@pcbloadtorque.com
Web site:
http://www.pcbloadtorque.com
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
Entered: AP Engineer: PE Sales: JC Approved: JSD Spec Number:
Date: 2/16/2015 Date: 2/16/2015 Date: 2/16/2015 Date: 2/16/2015 56130