Model Number
106M131
ICP® PRESSURE SENSOR
Revision: C
ECN #: 42143
[2]
Performance
ENGLISH
SI
Measurement Range
8.3 psi
57.23 kPa
Useful Overrange
10 psi
68.95 kPa
Sensitivity(± 2.5 %)
250 mV/psi
36.25 mV/kPa
Maximum Pressure(step)
300 psi
2068.5 kPa
Maximum Pressure
(static)
2000 psi
13,790 kPa
Resolution
0.1 mpsi
0.00069 kPa
Resonant Frequency
60 kHz
60 kHz
Rise Time
5 µ sec
5 µ sec
Low Frequency Response(-5 %)
0.5 Hz
0.5 Hz
Non-Linearity
1 % FS
1 % FS
[1]
Environmental
Acceleration Sensitivity
≤
0.002 psi/g
≤
0.0014 kPa/(m/s²)
Temperature Range(Operating)
-65 to +250 °F
-54 to +121 °C
Temperature Coefficient of Sensitivity
≤
0.03 %/°F
≤
0.054 %/°C
Maximum Flash Temperature
3000 °F
1649 °C
Maximum Vibration
1000 g pk
9807 m/s² pk
Maximum Shock
2000 g pk
19,614 m/s² pk
Electrical
Discharge Time Constant(at room temp)
≥
1 sec
≥
1 sec
Excitation Voltage
18 to 28 VDC
18 to 28 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
<100 Ohm
<100 Ohm
Output Bias Voltage
3 to 8 VDC
3 to 8 VDC
Physical
Sensing Element
Quartz
Quartz
Housing Material
17-4 Stainless Steel
17-4 Stainless Steel
Diaphragm
316L Stainless Steel
316L Stainless Steel
Sealing
Welded Hermetic
Welded Hermetic
Electrical Connector
10-32 Coaxial Jack
10-32 Coaxial Jack
Weight
0.53 oz
15 gm
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
E
- Emralon coating
Supplied Accessory : Model 065A47 Seal ring 0.497 OD x 0.437 ID x 0.025 thk Acetal (2)
J
- Ground Isolated
[3][4]
W
- Water Resistant Cable
[5][3]
Supplied Accessory : Model 060A12 Clamp nut, 9/16-18-2A thd, 9/16" hex (1)
WM
- Water Resistant Cable
[5][3]
Supplied Accessory : Model 060A14 Metric clamp nut, M14 x 1.25-6g thd, 14 mm hex, stainless
steel (1)
NOTES:
[1] Zero-based, least-squares, straight line method.
[2] See PCB Declaration of Conformance PS023 for details.
[3] For sensor mounted in thread adaptor, see adaptor installation drawing for supplied
accessories.
[4] Used with optional mounting adaptor.
[5] Clamp nut installed prior to cable attachment
SUPPLIED ACCESSORIES:
Model 060A12 Clamp nut, 9/16-18-2A thd, 9/16" hex (1)
Model 060A14 Metric clamp nut, M14 x 1.25-6g thd, 14 mm hex, stainless steel (1)
Model 065A37 Seal ring 0.497 OD x 0.437 ID x 0.025 thk Brass (3)
Entered: AP
Engineer: APB
Sales: RWM
Approved: APB
Spec Number:
Date: 12/27/2013
Date: 12/27/2013
Date: 12/27/2013
Date: 12/27/2013
3498
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]