Model Number
086C02
ICP® IMPACT HAMMER
Revision: L
ECN #: 48526
[2]
Performance
ENGLISH
SI
Sensitivity(± 15 %)
50 mV/lbf
11.2 mV/N
Measurement Range
± 100 lbf pk
± 444 N pk
Resonant Frequency
≥
22 kHz
≥
22 kHz
Non-Linearity
≤
1 %
≤
1 %
Electrical
Excitation Voltage
20 to 30 VDC
20 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
<100 Ohm
<100 Ohm
[1]
Output Bias Voltage
8 to 14 VDC
8 to 14 VDC
Discharge Time Constant
≥
500 sec
≥
500 sec
[1]
Physical
Sensing Element
Quartz
Quartz
Sealing
Epoxy
Epoxy
Hammer Mass
0.34 lb
0.16 kg
Head Diameter
0.62 in
1.57 cm
Tip Diameter
0.25 in
0.63 cm
Hammer Length
8.5 in
21.6 cm
Electrical Connection Position
Bottom of Handle
Bottom of Handle
Extender Mass Weight
2.6 oz
75 gm
Electrical Connector
BNC Jack
BNC Jack
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
TLD
- TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
NOTES:
[1] Typical.
[2] See PCB Declaration of Conformance PS068 for details.
SUPPLIED ACCESSORIES:
Model 081B05 Mounting Stud (10-32 to 10-32) (2)
Model 084A08 Extender - Steel, 0.6" Diameter (1)
Model 084B03 Hard Tip- Hard (S.S) (1)
Model 084B04 Hammer Tip- Medium (White Plastic) (1)
Model 084C05 Hammer Tip- Soft (Black) (2)
Model 084C11 Hammer Tip- Supersoft (Red) (2)
Model 085A10 Vinyl Cover For Medium Tip (Blue) (2)
Model HCS-2 Calibration of Series 086 instrumented impact hammers (1)
Entered: LK
Engineer: KW
Sales: AT
Approved: BAM
Spec Number:
Date: 8/9/2018
Date: 8/9/2018
Date: 8/9/2018
Date: 8/9/2018
086-3020-80
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
