Driver & Camera Installation
1. Place the CD diskette into your CD-ROM drive (Please do not connect the
camera at this stage).
2. The CD-driver will auto-run and then the installation menu will come up on your
screen (if it does not, please run the program "Install.exe" from the CD-ROM
drive) The menu will show the installation buttons for the camera driver .
3. Click the button "Install camera driver" to start .
4. After finishing the installation, please reboot your computer to restart windows.
5. Plug the camera into an available USB port on your PC or USB hub. Your
computer will detect the new device "PC camera" and will appear in the
windows task bar . (You may need to restart your computer again once this is
completed.)
6. This camera is applicable with microphone function for online chatting or
movie capturing, either via USB cable or via additional audio cable. If it is
audio cable, please plug it into the MIC-IN of your sound card.
7. In some cases, while detecting new devices, Windows may ask for your
original Windows-CD driver. Please follow the instructions to insert your
Windows-CD and run the program.
8. Once you have plugged in your camera, please open VideoCap which can be
found by going into START and then selecting JPEG Camera.
Plug your
camera into
USB port.
Select this to install
camera driver
Note:Although "USB 2.0 Compliance JPEG
video camera" is displayed due to product
limitation, this is actually a USB 1.1 product.
