29
Chapter 3: BIOS Setup Utility
ACPI Standby State
This item selects the status S1(Stop Clock) or S3(Suspend to
RAM) when the system enters the power-saving Suspend
mode.
Power Management
Use this item to enable or disable a power management
scheme. If you enable power management, you can use the
items below to set the power management operation. Both
APM and ACPI are supported.
Suspend Time Out
This sets the timeout for Suspend mode in minutes. If the time
selected passes without any system activity, the computer will
enter power-saving Suspend mode.
Resume On RTC Alarm / Date / Hour / Minute / Second
The system can be turned off with a software command. If
you enable this item, the system can automatically resume at a
fixed time based on the system’s RTC (realtime clock). Use
the items below this one to set the date and time of the wake-
up alarm. You must use an ATX power supply in order to use
this feature.
LAN/Ring Power On
The system can be turned off with a software command. If
you enable this item, the system can automatically resume if
there is an incoming call on the Modem. You must use an ATX
power supply in order to use this feature.
Keyboard Power On
If you enable this item, system can automatically resume by
pressing hot keys on the keyboard or typing in the password.
You must enable the Keyboard Power On jumper and use an
ATX power supply in order to use this feature.
