Expansion Slots Installation
This mainboard has one 4xAGP, one CNR and two 32-bit PCI
(Peripheral Components Interconnect) expansion slots.
4 x AGP (Accelerated Graphics Port) Slot
You can install a graphics adapter supporting 4xAGP specification
in the AGP slot. This slot has one 4xAGP edge connector.
CNR (Communications Networking Riser) Slot
You can install a CNR (the Communications Networking Riser)
card in the CNR slot.
PCI (Peripheral Components Interconnect) Slot
You can install the 32-bit PCI interface expansion cards in the slots.
CNR1
PCI2
PCI1
AGP1
1. Remove a blanking plate from the system case
corresponding to the slot you are going to use.
2. Install the edge connector of the expansion card
into the expansion slot. Ensure that the edge
connector is correctly seated in the slot.
3. Secure the metal bracket of the card to the system
case with a screw.
17
