PC Chips M909G Series, Руководство пользователя

Страница: 39 / 64

23
Chapter 2: Motherboard Installation
PCI Slot
You can install the 32-bit PCI interface expansion cards in the
slots.
CNR Slot
This slot is used to insert CNR (Communications and Networking
Riser) cards including LAN, Modem, and Audio functions.
Dual Monitor
In order to enable “Dual Monitor” Function, users must have
“
Two Monitors” , “Two Graphics Devices” (one is for AGP
graphics card; the other one is for onboard VGA) and Windows
2000 or Windows XP that supports the Dual Monitor Function.
Users must follow the “Dual Monitor Installation” below or visit
our website at “Http://www.pcchips.com/support/FAQ” for
detailed information.
Dual Monitor Installation (For Windows XP)
If the onboard VGA is first installed, and you would like to use the
add-on AGP card. Please follow the installation steps 1-6. Users
may go to step 4 directly if the add-on AGP card is installed first
and then turned on the onboard VGA devices for “ secondary
display”.
Step 1: Remove the Onboard VGA Driver
Go to “ Control Panel”
Choose “Add or Remove Programs”
Choose “Intel
® ® ® ® ®
Extreme Graphics Driver”
Click “Remove”
Shut down the computer