Install the Extension Brackets
LAN Adapter Extension Bracket
This bracket supports an RJ45 network connector and connects to
the built in J4 LAN header on the mainboard.
LAN Extension
Bracket
J4 LAN Header
1
1.
On the mainboard, locate the J4 LAN header for this bracket.
2.
Plug the cable from the bracket into the LAN header.
3.
In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.
Fax/Modem DAA Module
The Fax/Modem DAA module plugs directly into the mainboard
adjacent to an expansion slot in the system chassis. When you
remove the blanking plate from the system chassis, you can access
the LINE and TEL RJ11 connectors on the metal edge of the
Fax/Modem DAA module.
J2-MODEM Header
GND 1
GND 3
GND 5
AUX 3V 7
HOOK 9
RIN 11
AUX 5V 13
MUTE 15
2 MCLK
4 FRA-SY
6 SCLK
8 RIN-WAK
10 GPIO
12 SDO
14 SDI
16 RST
19
