28
Motherboard User’s Guide
Chapter 4 Software & Applications
Introduction
This chapter describes the contents of the support CD-ROM that comes with the
motherboard package.
The support CD-ROM contains all useful software, necessary drivers and utility
programs to properly run our products. More program information is available in
a README file, located in the same directory as the software.
To run the support CD, simply insert the CD into your CD-ROM drive. An Auto
Setup screen automatically pops out, and then you can go on the auto-installing or
manual installation depending on your operating system.
If your operating system is Windows 2000/XP, it will automatically install all the
drivers and utilities for your motherboard.
Installing Support Software
1
Insert the support CD-ROM disc in the CD-ROM drive.
2
When you insert the CD-ROM disc in the system CD-ROM drive,
the CD automatically displays an Auto Setup screen.
3
The screen displays three buttons of
Setup
,
Browse CD
and
Exit
on
the right side, and three others
Setup
,
Application
and
ReadMe
at
the bottom. Please see the following illustration.
The
Setup
button runs the software auto-installing program as explained in next
section.
The
Browse CD
button is a standard Windows command that you can check the
