PBZ CropCare PA1500, Руководство пользователя

Страница: 7 / 14

7
Picking Assistant Operation
1. Check to be sure the batteries on the picking assistant are
charged and ready for use. Press the battery check button
(a) on the switch box, and read the gauge (b) above it to
assure the batteries are adequately charged (Figure 7).
See page 9 for more information on battery level.
2. Make sure the motor assembly (a) is firmly engaged
against the tire and that the pull-pin is properly locked
into one of the operating position holes (b) as shown
(Figure 8).
3. 3. Turn the picking assistant on by moving the switch
(c) from the “off” position to either the “forward” or
“reverse” position (Figure 7).
4. With the switch in either the “forward” or “reverse”
position, press and hold the foot switch (a), located
on the foot rest (b), with your left foot to move in the
selected direction (Figure 9).
5. As you move along the row, use the steering arm (a) to
steer the picking assistant (Figure 10).
6. When the batteries needs to be charged, see the
instructions in the battery maintenance section (page 9).
7. If the picking assistant is to be stored on an incline, be
sure to have one, or both, motors engaged to prevent the
picking assistant from moving.
8. Always flip the power switch (c) (Figure 7) to the off
position when leaving the picking assistant unattended for
any reason.
9. To switch from low speed to high speed first press pedal
(a) to move then press pedal (c) for the second speed.
Both pedals need to be pressed. Releasing pedal (c)
reduces speed back to low speed (Figure 9).
Operating Instructions
Figure 7: Control box
b
a
c
Figure 8: Operating position
b
a
Figure 9: Foot switch
Figure 10: Steering arm
a
c
b
a