PBZ CropCare ATV-MX160, Руководство пользователя

Страница: 9 / 12

9
Maintenance Instructions
Routine Maintenance
1. It is recommended to perform a visual and physical inspection for worn parts, loose bolts, damaged hoses, or other visible
problems. Make all necessary repairs before spraying. To order parts or receive technical help, please contact the original
retailer
2. After each use it is important to rinse the boom and all components by running water through the entire system.
3. Tip strainers should be taken out and rinsed on a regular basis. Tip strainers are the small screens located behind each spray
nozzle on the boom (Figure 6, page 6).
4. Check the amount of grease between the hinge plate and the boom wing. Add grease as needed to keep the wing folding
smoothly and quietly.
It is very important to perform routine maintenance on your sprayer boom before and after each use. Good maintenance practices
will help to guard against any breakdowns or accidents.
Note: Always wear the proper Personal Protective Equipment (PPE) when performing maintenance on your sprayer.
TeeJet
®
Nozzle Body Breakdown & Parts List
Breakdowns & Parts Lists
Ref # Qty. Part Number Description
1 1
22251311500NYB
Elbow body, 1/2” (shown)
- 1 22252312500NYB Tee body, 1/2”
2 1 CP21953EPR* Rubber diaphragm
3
1
2195010NYB*
Diaphragm cap, 10 psi
3
1
2
Note: Items 2 & 3 are included with Item 1