8
AUTOSOUND COMPONENT TWEETERS
These high quality tweeters come complete with several mounting housings for
installation versatility. Typically tweeters should be mounted on axis and as
close to ear level as possible. After you have chosen the housing to be used,
gently press the tweeter in the proper mounting base. Once the tweeter base is
mounted, push and “twist” the housing until it locks to the base. Below are
exploded views showing the possible types of tweeter mounting.
9
CROSSOVER NETWORK INSTALLATION AND WIRING
Your PowerBass Autosound Component system contains two separate 2-way
crossover networks. When choosing a location to mount the crossovers, keep in
mind they contain electronic parts which can be damaged by moisture and dirt.
Correct wiring of the crossover is critical to avoid damage to the speakers and
ensure true high fidelity sound. Pay close attention to the markings on the
crossover to be certain the correct speakers are in the correct outlets as follows:
1)
Connect the amplifier or head unit output to the crossover’s input (IN)
terminals.
2)
Connect the terminals labeled woofer (W) to the component midrange speaker.
3)
Connect the terminals labeled tweeter (T) to the component tweeter set.
NOTE: BE SURE TO OBSERVE PROPER POLARITY WHEN CONNECTING SPEAKER WIRES
TO THE CROSSOVER NETWORK TERMINALS.
This manual is the exclusive property of PowerBass USA, Inc. Any reproduction of this manual, or use other than its
intentions is strictly prohibited without the express consent of PowerBass USA, Inc.
©
Copyright 2006 PowerBass USA, Inc.
