PB Heat PUREFIRE, Руководство пользователя

Страница: 6 / 8

6
User Maintenance
WARNING
Service on this boiler should be undertaken only by trained and skilled personnel from a
qualified service agency. Inspections should be performed at intervals specified in the
Installation, Operation and Maintenance Manual and this User’s Information Manual. Maintain
manuals in a legible condition.
Keep boiler area clear and free of combustible materials, gasoline and other flammable vapors
and liquids.
Do not place any obstructions in boiler room that will hinder flow of combustion and ventilation air.
A. General Housekeeping (Continuous)
1. Keep the area around this appliance clear and free of combustible materials and obstructions.
2. Do not store or use flammable vapors or liquids, such as gasoline, in the vicinity of the boiler.
This applies to any fossil fuel-fired appliance.
3. Do not store or use any sources of hydrocarbons in the vicinity of this appliance.
4. Do not store or use any sources of hydrocarbons in the vicinity of the inlet air termination. If the
source of hydrocarbon contamination cannot be removed, the combustion air must be re-piped
to a different location.
5. Sources of hydrocarbons include bleaches, detergents, cleaning solvents, chlorinated waxes or
cleaners, chlorine based swimming pool chemicals, rock salt or other chloride based ice melt
solutions, water softener salt, refrigerants, paint or varnish removers, fabric softeners,
hydrochloric acid or muratic acid, cements, glues and adhesives.
B. Inspect Venting / Air Inlet System (Monthly)
1. Inspect the vent pipe and assure that it is continuous with no separations, obstructions, sags,
discoloration, depressions or deformation. Vent pipe must be supported at minimum 4 foot
(122 cm) intervals and secured with adhesive specifically formulated for the material used.
2. Air inlet piping must be continuous from the air inlet termination to the boiler with no
separations, obstructions or sags. Air inlet piping must be supported at minimum 4 foot
(122 cm) intervals and secured with adhesive specifically formulated for the material used.
3. Inspect around the vent and air inlet terminations outside the home for obstructions. Keep area
clear of snow and debris. Inspect also for any gaps at the wall penetration(s) which could allow
vented gasses to reenter the home.
4. Notify a qualified service contractor if any problems are found with the venting or air intake
systems and be sure that the problems are corrected.
WARNING
Failure to inspect the venting system and, if problems are found, to notify a qualified service
technician, may result in boiler exhaust entering the structure and causing severe personal
injury or death from carbon monoxide poisoning and oxygen depletion.