AMP 8200
Configuration and Installation
Copyright © 2022 PayFacto Inc.
Page 18 of 18
The terminal uses 2 ¼” or 58mm thermal paper rolls to print transaction receipts.
To install the printer paper:
On the back of the terminal at the top, lift the lever with the contactless logo to
unlock and open the printer cover.
NOTE: The printer cover opens on a hinge, it does
not come off the terminal.
1.
Place the roll of printer paper in the paper tray, leaving about 2 inches (5 cm) of
paper beyond the printer's cutter.
IMPORTANT! Make sure the paper unrolls from the
back of the roll, otherwise the printer will be unable
to print the transaction receipt.
2.
Close the printer cover until it snaps into place and remove any excess paper.
3.