Ins-30085 Net2Air Ethernet bridge
21/11/2011
Technical Support
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
01273 811011
Software - Requires Net2 v4.14 or later.
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
The access control unit connects to the Net2 software running on the PC using Paxton Net2Air proprietary wireless
technology. A Net2Air bridge enables communication from the Net2 software to the Paxton family of wireless
products.
Radio signals do not always behave as you might expect. For example, a mobile phone that displays a full signal
on one part of the site will lose signal completely only a few metres away. These problems can be addressed by
using the Net2 site surveyor kit (690-200).
See also:
X
AN1095 - Net2 nano - How does it work? <
http://paxton.info/974 >
X
AN1096 - How to plan a Net2 nano installation <
http://paxton.info/975 >
X
Ins-30096 - Net2Air site surveyor <
http://paxton.info/1015 >
Net2Air wireless communication
Enclosure
Power
Net2Air activity
TCP/IP LAN
connection
The unit is powered from a
supplied mains power adaptor
via a plug connection.
The unit should be mounted vertically in the
supplied base to achieve the optimum range.
Power over Ethernet.
This unit can be powered over the ethernet
link with POE compatible hardware.
Ether
net
M
ac A
ddr
ess:
00-01-02-03-04
Access hole for reset button
Paxton
Access
Server Connected - The TCP/
IP interface is communicating
with the PC Net2 server
Reader
Control unit
Net2Air Ethernet bridge
Net2 Server
Page 1
Paxton
Radio frequency
The unit is set to channel 11 (2.405 GHz). This product should not be installed within 3 metres of any other radio
(LAN/Wi-Fi) equipment to reduce the possibility of interference.
