Paxar Monarch 1460, Справочное руководство

Страница: 111 / 217

The following syntax is the response for a Job 3 request.
Syntax
{J,"Status1 A,B","Status2
A,B,C,D,E","FMT-1","BCH-2"}
"Status1 A,B" Status1 A contains the field number, in the
format or batch, where an error was
found. If the error is not in the format or
batch, a "0" is returned.
Status1 B contains an error number, which
represents the actual printer error. The
error numbers can be found in Chapter 9,
"Errors."
Example
{J,"2,612",}
2 is the field number where an error was found. 612 is the
error number, indicating that data is missing or does not match
the format definition for that field.
n
Error numbers found in Status1 B, always have a value equal
to or greater than 500. These are considered very serious
errors.
"Status2 A,B,C,D,E" contains the packet type, field type, field
number, parameter, and error number.
Status2
A- Packet Type represents the MPCLII packet that the
error occurred on. The packet could be
Format (
F ), Batch ( B ), Check Digit ( A ),
Graphic ( G ), or Font ( W ).
Status2
B- Field Type represents the MPCLII field that the error
occurred on. If the packet has no fields,
Status2 A will be replicated. If the error
occurs before the field is identified a
question mark is sent. Since the batch
data is variable, a
D is sent to indicate
data.
Chapter 7. Status Polling
7-9