Paxar Mobile Work Station (MWS) Monarch 9878, Руководство по эксплуатации

Страница: 8 / 24

2-2
About the MWS
C o n n e c t i n g t h e P o w e r C o r d
Make sure to set the proper voltage on the charger voltage selector switch
on the right side of the charger (115V in U.S. or 230V International).
Incorrect voltage selection can result in charger failure. Connect the
charger's power cord to the power inlet. Power cords are not included with
International models. The charger's power switch is also on the right side.
The battery's status LEDs are located on the left side of the Power Panel.
The MWS Power Switch is to the right of the LEDs. See Chapter 3,
"Charging the Batteries" for more information.
Do not plug the external power cord into a wall outlet until you
are ready to charge the battery. See Chapter 3, "Charging the
Batteries" for important battery information.
Power
Inlet
Voltage
Selector
Charger
Power
Switch
Battery
Status LEDs
1
1
0
0
%
8
5
%
7
0
%
5
0
%
3
0
%
Power
Panel
MWS
Power
Switch
Power
Cord
115
115
24VDC Charger shown