Paxar Gold 6037EX Скачать руководство пользователя страница 205

Страница: 205 / 230

Using UServe and UClient 7-25

Message Solution

Invalid Parameters for command

Verify the syntax of the command
and retry it with all of the
parameters.

No Connection is present with
Ultra.

Establish a PC/printer connection.

No directory was specified.

Verify the syntax of the command
and enter a directory name where
specified.

No File Specified.

A file name parameter was left blank.
Retry the command, listing a file
name.

No Files could be found.

The file you specified in the
command does not exist. Verify the
correct name and/or spelling and
retry the command.

No matching files found.

You specified file names with a wild
card, and there are none fitting the
specification. Verify the file names
and spelling and retry the command.

Open Failed.

UServe is not running on the printer.
Start it and establish a PC/printer
connection.

Response could not be read
from Ultra

Verify that a valid PC/printer
connection exists and retry the
command.

Request could not be sent to the
Ultra.

Verify that a valid PC/printer
connection exists and retry the
command.

Soft Reboot Failed.

Verify that a valid PC/printer
connection exists and retry the
command.

Sum check received from the
Ultra was invalid.

Verify that a valid PC/printer
connection exists and retry the
command.

Содержание Gold 6037EX






































































































































































































































Результаты поиска

Содержание Gold 6037EX

Отзывы:

Похожие инструкции для Gold 6037EX

Бренды по названию

Популярные бренды

Paxar Gold 6037EX, Руководство программиста

Результаты поиска

Содержание Gold 6037EX

Отзывы:

Похожие инструкции для Gold 6037EX

Бренды по названию

Популярные бренды