Paxar 6020 Series Скачать руководство пользователя страница 56

Страница: 56 / 68

Messages (continued)

Message

Corrective Action

OVERHEAT
(when the power is first
turned on)

Ensure that you are operating or
storing the printer within the
recommended temperature listed
in the specifications.

Contact Monarch Service.

OVERHEATED-WAIT
(while printing labels)

Let the printer cool for a few
seconds.  You don’t have to turn the
printer off.  When the printer is cool,
the display shows PRINTED.  You
may begin printing.

If the message still appears.
Contact Monarch Service.

PAPER JAM

Press

to clear the message.

Check the label and backing paper
tracks per the maintenance
instructions.

Reload the supplies if necessary.

The label size set in the format does
not match the supply you have
loaded. Load the correct supply.

RECHARGE

Turn the power off and replace the
handle with a fully
charged handle.

Recharge the used handle.

SERVICE REQUIRED

Contact Monarch Service.

STRIP LENGTH?

For offline printing models. Refer to

the

Offline Features.

Operator’s Handbook

Содержание 6020 Series




































































Результаты поиска

Содержание 6020 Series

Отзывы:

Похожие инструкции для 6020 Series

Бренды по названию

Популярные бренды

Paxar 6020 Series, Руководство оператора

Результаты поиска

Содержание 6020 Series

Отзывы:

Похожие инструкции для 6020 Series

Бренды по названию

Популярные бренды