5)
0~9 (Virtual key)
6)
Magnetic Card Reader Track 1 / 2 / 3, bi-directional
7)
IC Card Reader EMV4.3 L1 & L2 certified
8)
SAM Slots 1 Micro SAM Slot, ISO7816
9)
Communication 4G / 3G / Blu WiFi
10)
Ports
1Micro USB
11)
Battery Li-ion 3050mAh
12)
Power Supply
Input: 110~240V AC, 50/60Hz
13)
Output: 5V DC, 2A
14)
Working Environment
Temperature: 0°C to 50°C (32°F to 122°F)
15)
R.H. : 10
﹪
~90
﹪
( non-condense)
16)
Storage Environment
Temperature: -20°C to 70°C (-4°F to 158°F)
17)
R.H. : 5
﹪
~95
﹪
( non-condense)
18)
Dimensions
136.5mm x 70mm x 17.4mm (L x W x H)
19)
Weight
182g with battery
20)
Wireless Module
：
21)
Operating Frequency Band (RF):
22)
LTE (FDD) B2/B4/B5/B17, all bands with diversity
23) HSDPA/HSPA+/HSUPA/WCDMA B2/B4/B5
24)
Type of Modulation
：
LTE (FDD)
FCC notice
The following statement applies to all products that bear the FCC logo
and/or FCCID on the product label.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiated radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
