PAX TECHNOLOGY LIMITED
5
1)
IM20 Power ON/OFF
Power on: Through the USB cable or MDB interface to the
IM20 power supply, then PAX LOGO will display
on LCD.
Power off: Disconnect the IM20 power supply, then shut
down.
2)
IC Card
Put IC card chip side upward, push-in IC card slot and to
bottom.
3)
Magnetic Stripe Card
Put Magnetic Stripe card stripe side downward, push-in IC card
slot and to bottom, then pull out quickly to complete the card
reading operation.
4)
Contactless Card
The card read area is above the LCD, Put the card above the
LCD.
5
5
.
.
M
M
a
a
i
i
n
n
t
t
e
e
n
n
a
a
n
n
c
c
e
e
a
a
n
n
d
d
U
U
s
s
a
a
g
g
e
e
1)
Do not damage any of the cables; if a cable becomes damaged,
immediately discontinue its use and seek a replacement.
2)
Make sure the terminals the power or MDB cables connect to
provide the appropriate voltages at the proper pins.
3)
Do not insert unknown materials into any port on the IM20,
this may cause serious damage to the device.
4)
If the IM20 becomes defective, please contact a professional
technician for repairs instead of attempting them on your own.
5)
The IM20 contains hardware tamper-proofing measures;
disassembly of the device will trigger the tamper circuits, at
which point it will have to be rearmed by qualified personnel
before the device is ready to resume operation.
