3 Mounting and installation [specialist]]
22
991339002-mub-ml - V01
2021/11
The following steps are required for mounting the MB3.10:
8.
Remove the terminal cover (white front panel).
9.
Turn in the screw for the upper mounting hole (ø 4 mm) at the mounting location until the
screw head has a clearance of 5 7 mm to the mounting surface.
10.
Place the MB3.10 at the screw of the upper mounting hole and adjust it vertically.
11.
Mark the position of the lower mounting hole (ø 3,5 mm) through the module casing.
12.
Remove the MB3.10 and prepare the mounting hole for the lower screw.
13.
Place the MB3.10 at the screw of the upper mounting hole and then fasten the screw in the
lower mounting hole.
14.
Mount the front panel.
