PAW HeatBloC, Информационный лист по монтажу и демонтажу

Страница: 7 / 28

1 Mounting of the insulation [specialist]
7 993xx3x-inf-ml – V01 2017/08
Carefully read these instructions before installation and commissioning.
Save these instructions in the vicinity of the installation for future reference.
The chapters called [specialist] are intended for specialists only.
1 Mounting of the insulation [specialist]
The mounting of the HeatBloC insulation must be carried out in a specific sequence
in order to avoid damages of the insulation.
Attention: Connect the pump plug to the pump first.
Another mounting sequence can cause damage to the insulation.
1. Mixed HeatBloC:
Pass the cable of the actuator through
the insulating shell of the mixed HeatBloC. 2. Unmixed / mixed HeatBloC:
Pass the insulation from below
along the pump cable.
3. Mixed HeatBloC:
Observe the actuator which hangs out
of the opening of the insulating shell of
the mixed HeatBloC.