5 Assembly and installation [specialist]
2018/11
9945x1051x-mub-en – V03
15
5.1
Installation of the HeatBloC
NOTICE
Verify if the grounding cable holds securely in place at the differential pressure sensor!
Carry out the following mounting instructions in parallel at each heating circuit of the
system.
1.
Mount the modular distribution
manifold or the bracket. Please
observe the separate instructions!
2.
Remove the station from the
packaging.
3.
Remove the thermometers from
the handles.
4.
Take off the insulating front shells
of the HeatBloC.
5.
Put the HeatBloC with the gaskets
onto the flanges of the distribution
manifold or of the bracket and
screw the flanges together.
6.
Only Grundfos Magna 3: Mount
the pump. Please observe
the instructions of the pump!
7.
Connect the HeatBloC to the
installation by using the pipes.
The installation to the piping must
be carried out without any tension.