4 Assembly and installation [specialist]
2016/01
993603x2x-mub-en – V09
15
Assembly
1.
Fix the wall brackets to the wall with the
enclosed screws and washers.
2.
Screw the HeatBloC with the coupling
piece for overhead installation (G-3)
to the wall bracket.
only for assembly under a modular
distribution manifold
3.
Mount the distribution manifold on the
PAW wall bracket. You can mount the
heating circuit K36E directly on the
connections of the manifold.
Remove the plugs in the connections of
the distribution manifold if necessary.
Piping
1.
Connect the HeatBloC to the installation.
The hydraulic schemes for the two
assembly versions can be found on
pages 7 and 8. The connections to the
installation must be stress-free.
2.
Connect the pump.
3.
Carry out the pressure test and check
all thread connections.
