Page 16
41.
Watch for Hazards:
Using the PAW on or near steep inclines can cause your PAW to be
uncontrollable and cause injury to yourself & others and or damage to property. On steep inclines/
declines, the PAW could reach an unsafe speed. Operating the PAW on steep inclines/declines can cause the
PAW to tilt, tip, or possibly roll over. Another danger is loss of drive wheel traction. All of the above can cause the
PAW run out of control resulting in possible harm and injury to yourself and/or others. It can also result in damage
to your PAW and/or other property. At all times keep your feet firmly on the ground and two hands on the PAW
handles to maintain control.
42.
BEFORE OPERATION OF YOUR PAW:
Your new PAW is similar to any other power driven tool. Although very
easy to operate it will take some familiarity with the controls and balance to master it fully. Before operating the
PAW, it is a good idea to get familiar with controlling your PAW. Your PAW operates in much of the same way as a
standard manually operated wheel barrow, the only major difference is your PAW has an optional forward/reverse
power assist. According to your physical capability, the PAW can easily be moved directionally as you desire.
43.
MANUAL OPERATION OF YOUR PAW:
With power switch in the
OFF (0)
position take the PAW to
a large open outside area. Grasp the PAW handles with both hands, lift the PAW until the support
legs are off the ground and the weight of the load is transferred to the drive wheels. In this position
manually push forward, backwards, and practice turning the PAW. To dump the PAW, lift both handles
in an upward forward motion pivoting on the drive wheels and onto the dump support brace until the
tub is in a vertical position.
Operating your PAW
44.
Lay out the battery
charger (Q) as shown.
Battery charger (Q)
vents must face
upwards.
45.
Remove the power
plug from the power
outlet located on the
right side of the
battery box (C).
Q
Power Plug
Q
Q
Power Plug
Power Outlet
Power Outlet
C
C
46.
Install the charger plug from the battery charger (Q) into the power outlet on the battery box (C).
47.
Plug the wall plug from the battery charger (Q) into a wall outlet, a GFCI outlet is recommended.
Q
Q
Power Outlet
Power Outlet
Charger Plug
Charger Plug
C
C
Q
Wall Plug
Attaching the battery charger
Power Switch
