5
Floor Grate and Pan Installation
Place both Floor Grates in the cage and install the Protective Floor Grate Cover (Figure H) in
the middle of the cage between the floor grates. If the grate cover slides from side to side in the
back of the cage, the divider panel holder is upside down. If so, remove the back panel and re-
install it correctly. Slide each ABS Plastic Pan underneath the grates as shown in Figure H1.
Installation of the Divider Panel Extension Bar
The divider panel extension bar is needed whenever the floor grates and pans are not used. The divider panel,
when used, will slide on top of the extension bar. Install the divider panel extension bar (Figure 1) as shown in
Figures 2 and 3.
Divider Panel Extension Bar
Figure 1
Figure 2
Figure 3
Note:
The extended
lips are on top.
