manualshive.com logo in svg

Paul thermos 200, Руководство по эксплуатации

Поделиться
Скачать
Paul thermos 200 Скачать руководство пользователя страница 27

Status 14.07.09 

 
We reserve the right to make 
changes favouring technical 
progress.

 

User Guidance 

Automatic Control Unit 

thermos 200 / 300 DC 

®

WÄRMERÜCKGEWINNUNG

 

© Paul Wärmerückgewinnung GmbH • August-Horch-Straße 7 • 08141 Reinsdorf • Deutschland  

Tel: +49(0)375-303505-0 • Fax: +49(0)375-303505-55  • E-Mail: [email protected] • Internet: www.paul-lueftung.de 

 

15

2.6  

Menu System setup – Factory settings 

 

        ---------------------- 
        |              9.8.0 | 
        |                  <-| TA1 
        |Restore to factory  | 
        |settings, all       | 
        |customised values   | 
        |will be lost        | TA2 
        |                    | 
        | Yes                | 
        ---------------------- 
          TA5     TA4      TA3 

 
This menu allows the user to restore the system to the PC-programmed factory settings. 
The control system will restart automatically after validation with TA5. 

 

 
 

2.7  

Menu System setup – Enable 9.9.0 

 

        ------------------------------  
        |Enable 9.9.0                | 
        |                            |  
     0  |>Frost prot. heater  ON   <-| TA1 
     1  | PTC heater         OFF     | 
     2  | Brine/ground HX    OFF     | 
     3  | Bypass 1           OFF   ok| TA2 
     4  | Bypass 2           OFF     | 
     5  | Bypass 3           OFF     | 
     6  | Bypass 4           OFF     | 
     7  | Water/PTC DCTH     OFF     | 

                 

|   

↓

      

↑

         SEL     | 

        ------------------------------ 
          TA5     TA4        TA3 
 

Press TA4 or TA5 (up/down arrows) to scroll up or down through the menu 9.9.0 - 9.9.7, 
press TA3 to select ON or OFF. 
The associated modules or devices are activated or deactivated via the software. 
If this function is switched off, the related sensor readings are no longer evaluated. 
Press TA1 to return to the menu System setup – Enable 9.9. 
The current active functions of the system are displayed in the menu Enable only, not in the basic menu. 
Bypass 2, 3, 4 refer to functions only available in the compakt 350 DC unit. 

 

Содержание thermos 200









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды