2
0 Preamble
PLEASE READ THIS MANUAL CAREFULLY BEFORE INASTALLATION AND COMMISSONING!
THIS MANUAL HAS BEEN MADE WITH GREATEST CARE.
HOWEVER, NO RIGHTS CAN BE DERIVED THEREFROM. WE RESERVE THE RIGHT AT ANY TIME
TO PARTIALLY OR ENTIRELY CHANGE THE CONTENT OF THIS MANUAL WITHOUT PRIOR
NOTICE.
This manual contains all the best for an assembly plant and a heat recovery unit (HRU) necessary
information. The manual also serves as a handbook for installation, maintenance and customer service
work. We recommend that any intervention in the appliance installation company should be consulted.
Subject of this operating manual is the control unit TAC4 and the modules TCP/IP and GPRS. Possible
accessories are only described insofar as it is necessary for the appropriate operation. Please see the
particular manuals for further information on accessories.
If you have any questions that have not been answered or have not been sufficiently answered in this
documentation, please contact the company Paul Wärmerückgewinnung GmbH. We will be glad to help
you.
1 Introduction
Safety
1.1
Please always observe the safety instructions in this operating manual. The non-observance of the safety
instructions, warning notices, notes and instructions can lead to injuries or damages to the maxi.
•
Unless otherwise stated in this operating manual, only an authorised installer is entitled to install,
connect, put into operation and maintain the maxi;
•
The installation of the maxi is to be performed according to the general local building, safety and
installation instructions of the corresponding local authorities, of the water works and electric
works and other official regulations and directives;
•
Always follow the safety instructions, warning notices, notes and instructions described in this
operating manual;
•
Please keep this manual during the complete life time of the maxi in proximity to the device;
•
The instructions for the regular replacement of the filters or the cleaning of the supply and exhaust
air valves are to be strictly followed;
•
The specifications stated in this document may not be changed;
•
Any modification of the maxi is prohibited;
•
In order to guarantee that the device will be regularly controlled, it is recommended to conclude a
maintenance contract. Your supplier can give you the addresses of authorised installers in your
area.
Used
symbols
1.2
The following symbols are used in this manual:
Caution, special note!
Risk of:
- injury of the user or the installer
-
damages
to
the
device
- impairment of the operation of the device if the instructions are not
carried out properly
Содержание TAC4 DG + TCP
Страница 2: ......
