5 / 8
TX RX
SERVICE
ARC SPDIF
USB 2.0
USB 2.0
SWITCH
Connection Signal
Indicator lamp
(on the left side of the
HDBT OUT port)
▪
Illuminate: Transmitter and Receiver are in good connection
status.
▪
Flash: Transmitter and Receiver are in poor connection
status.
▪
Dark: Transmitter and Receiver are not connected.
Data Signal
Indicator lamp
(on the right side of
the HDBT OUT port)
▪
Illuminate: HDMI signal with HDCP.
▪
Flash: HDMI signal without HDCP.
▪
Dark: No HDMI signal.
HDMI IN
HDMI source input.
IR IN
IR input port for receiving the signal of IR remote.
IR OUT
IR output port for control of source device. This IR output signal
is from IR IN port of the Receiver.
L/R OUT
3.5mm stereo connector for analog audio output.
SPDIF OUT
SPDIF connector for optical audio output.
RS-232
3-pin Phoenix connector for RS232 command transmission,
supporting RS-232 command pass-through between the
Transmitter and Receiver.
LAN
RJ45 connector for connecting Hub or router.
5.2
Receiver Panel
DC 24V
HDBT IN
HDMI OUT
IR IN
IR OUT
SPDIF IN
RS-232
LAN
Name
Function Description
Power LED
Red LED is on when the Receiver is working.
LED is off when the Receiver is on standby.
ARC LED
Green LED is on when ARC function is turned on.
