11
Points of Daily Lubrication For A
Patty-O-Matic Model Protege:
Always Unplug Machine and use Food Approved Oil and Grease!
The Following Parts should be lubricated daily to ensure proper machine maintenance
- Pressure Foot should be lifted up
and oiled. Grab Ball Knob and
lift up. Place a few drops of oil
on the shaft of the Pressure Foot.
Pressure Foot
Ball Knob
- Knock Out Shaft should be oiled
when the Knock Out Arm is in the
up position. The picture shown
displays with the Arm in the up
position.
- Tower Stem should be oiled when
the Feed Tray is removed as shown.
Knock Out Shaft
Tower Stem
Knock Out
Arm
- Rod End Bearings should be oiled
with a few drops of oil. Remember
that there are two Rod End Bearings
to be oiled. Do Not allow oil to drip
onto the Paper Feed Roller.
Rod End
Bearings
Pressure Foot
- Main Shaft should be oiled when the
machine is disassembled as shown in
picture. Be sure to oil the bottom by the
Main Shaft Block.
- The inside of the machine can be oiled
through the Rear Inspection Opening. Be
sure not to get oil on the drive belt of the
machine or the motor.
- The Grease Fitting in Main Shaft Block
of the machine should be greased once
every two weeks. 3 or 4 shots of grease is
recommended.
Main Shaft
Grease Fitting
Main Shaft Block
Paper Feed
Roller
